Inch inputs, millimetre engine
You enter inches. CutPilot converts to millimetres for packing, then shows the plan back in inches.
Calculator
Cut list optimizer
Enter an inch cut list on a 48 × 96 sheet, then open CutPilot to nest the parts.
Parts
Blade width
0.125 in is a common circular-saw kerf. Use 0.1 in for a thin-kerf blade, or your table-saw measurement.
Worked example
Two 24 × 30 × 24 boxes: four sides, two bottoms, four shelves, two backs on 48 × 96 stock with a 1/8 in kerf.
Questions
Is 48 × 96 the same as 4 × 8 ft?
Yes. This page uses inches. The 4 × 8 plywood calculator is plywood-specific with grain locked.