Construction varies
This list is a starting carcass: sides between a top and bottom, shelves in the opening, optional back. Confirm rebates, toekick, doors and hardware before you cut.
Calculator
Cabinet cut list calculator
Set the box size. The calculator builds sides, bottom, optional top, shelves and back — then you can nest the list.
Cut list
Joinery varies. Treat this as a starting list and check sizes before you cut.
| Part | Qty | Width (mm) | Height (mm) |
|---|---|---|---|
| Side | 2 | 560 | 720 |
| Bottom | 1 | 564 | 560 |
| Top | 1 | 564 | 560 |
| Shelf | 2 | 564 | 560 |
| Back | 1 | 600 | 720 |
What is generated
Two sides at height × depth. Bottom (and top, if on) sit between the sides, so their width is cabinet width minus two thicknesses. Shelves use the same inner width. A back is the full front size.
Doors and drawers
Doors are not added here. Use the drawer calculator for boxes, or add doors as extra parts in CutPilot.
Worked example
Default 600 × 720 × 560 mm, 18 mm stock, two shelves and a back. That is a common UK wall-or-base box before toekick or doors.
Questions
Are these finished sizes?
They are a configurable starting list. Overlay doors, inset doors and service voids change the numbers.
Can I switch to inches?
Yes. The unit control converts the box inputs and the derived parts.